Have you made the perfect stylish bathroom for you, but still not satisfied with the water pressure of the shower? Worry not, as certain DIYs can help you regulate the water pressure of the shower without the help of a professional and that too within the limited expense. However, if you could not manage to do it on your own then you can take the help of a professional plumber or shower installer.
So without any further ado, let’s have a look at the best and the most trusted ways to clean or refine the showerhead for right water pressure.
De-clogging the showerhead
There are chances that dirt, grime, gunk, or salts build up in the showerhead that causes it to clog and reduce the water pressure. Thus, the best way is the clean the showerhead with the right tools. Most of the like to use a pin to clean the holes, and some like to soak the showerhead in vinegar for a few hours to de-clog it.
Make sure to avoid using abrasive cleaning tools or cleansers to protect your showerhead from any damage and scratches.
Remove the flow regulators from the showerheads
In some countries, there are restrictions imposed on the flow of water from the showers to conserve water. Thus, the showerheads do not deliver the desired amount of water pressure and flow. However, you can make the shower as per your requirement by removing the flow regulators from showerheads. It is easy to remove the regulator from the showerhead, just take the help of the internet, and you are good to go.
Tip: flow regulators are mostly brighter than the other components in the showerhead.
Remove aerators from the showerheads
Removing aerators can boost the water pressure of the showerheads. It is a small component that adds air into the water to enhance your shower experience, but sometimes they tend to decrease the water pressure. Thus, nothing is better than removing them. Aerators are easy to remove, but each model of the shower has differently placed aerators, so you must refer to the manual to find out its location. Go through the internet to check out the procedure to remove the aerators from the showerheads. Also, remember to put it back if it doesn’t work out the way you wanted it to be.
Fix the water leaks if any
Sometimes water leaks are the primary cause of the low water pressure of the showerheads. If you doubt that there are any water leaks, then you must contact a professional plumber to analyze and fix the problem. You can check the leaks for yourself too, but it is best if you take professional help for long term benefits.
Try and adjust the main valve
It is best to make sure that the central turn off valve is completely open. If it isn’t, then turn it on to enjoy the required water pressure from the showerhead. This is the quick fix method to improve the showerhead water pressure without any hassles.
Winding up
All these methods are hit and trail ways to fix your problems; thus, if one doesn’t work, then try another approach to resolve your issue. And even if you are still not satisfied with the result, then you may replace the showerhead with a high-pressure one.